51
EN
Exposure
2
Compensation value: 0.3, 0.7 or 1.0
•
The compensation value will change if the EV step is changed.
g
“EV STEP” (P. 101)
Number of frames: 3
Setting display
Start shooting.
•
In single-frame shooting, the exposure changes every time the shutter button is pressed.
•
In sequential shooting, hold down the shutter button until the selected number of frames are taken.
•
Releasing the shutter button stops flash bracketing shooting. When it stops,
0
blinks in the
viewfinder and
0
is displayed in green on the super control panel.
How AE bracketing compensates exposure in each shooting mode
Depending on the selected shooting mode, exposure is compensated in the following way:
P
mode : Aperture value and shutter speed
A
mode : Shutter speed
S
mode : Aperture value
M
mode : Shutter speed
To apply AE bracketing to the exposure value you have compensated:
j
Compensate the exposure value, then use the AE bracketing feature. AE bracketing is applied to
the exposure value you have compensated.
Menu
MENU
[
X
]
[BRACKETING]
[AE BKT]
Viewfinder
TIPS
AE BKT
WB BKT
ISO BKT
FL BKT
BRACKETING
SETBACK
AE BKT
3F 0.7EV
3F 0.3EV
3F 1.0EV
OFF
Number of
frames
EV STEP
Bracketing
Compensation range
• The exposure value for the remaining
frames blinks during shooting.
E-620_MASTER.fm Seite 51 Dienstag, 17. Februar 2009 11:04 11
To Next Page
Loading...
