Olympus E-620 - Light Box Display

83
EN
Playback functions
6
You can view the playback image and another image together on the left and right sides of
the monitor. This is useful if you want to compare images you recorded using bracketing.
1 Press the P button during single-frame
playback.
• The frame being viewed is displayed on the left side of the
monitor, and the next frame is displayed on the right side.
The image is displayed at the same magnification of the
image being viewed.
• The image on the left is the benchmark image.
2 Press p to select the image on the right.
• You can protect, erase or copy the image on the right.
3 Press the P button.
• The camera returns to single-frame playback of the image
on the left at the magnification being viewed.
Operations during light box display
• Pressing the i button replaces the image on the left with the image on the right and becomes the
new benchmark image.
• You can use the control dial to change the magnification of both images at the same time.
• Pressing the < button or INFO button allows you to move the position of the image on the right with
the
p button. Pressing the < button or INFO button again allows you to move the positions of both
images with the
p button.
Light box display
MENU button
i button
P button
INFO button
< button
j
+2
2.0x
2.0x
54
54
53
53
+2
+2
+2
±0 W
W ±0
T
T
+1
+1
+1
+1
±0 W
W ±0
T
T
Benchmark image
AF compensation value during
shooting
AF compensation value in the
telephoto direction
AF compensation value in the
wide direction
(when [AF FOCUS ADJ.] is set)
2.0x
2.0x
54
54
53
53
2.0x
2.0x
54
54
53
53
p : Selects the right image p : Scrolls the right image p : Scrolls both images in
synchronization
• You can also use the INFO button
in the same way for this procedure.
**
*
E-620_MASTER.fm Seite 83 Donnerstag, 19. Februar 2009 9:53 09