113
Chapter 6 Measurement procedures (LX only)
For 8.5-mm type
1 Attach the new stereo optical adapter to the distal end of the
insertion tube while the live screen is displayed. Or select "SELECT
OPTICAL ADAPTER" on the menu screen.
2 Select “NEW STEREO ADAPTER” and press the [MEAS/ENTER]
joystick.
3 Select the stereo optical adapter to do initial settings for and press
the [MEAS/ENTER] joystick.
4 Do steps 3 to 10 in the “NEW STEREO ADAPTER” for the 4-mm and
6-mm types (page 108).
To Next Page
Loading...
