39
Chapter 3 Preparation and inspection before observation
When a live screen is displayed (4-mm, 6-mm and LX only)
1 If an optical adapter is attached while a live screen is displayed, the
system will recognize the optical adapter type automatically and
display its name.
NOTE
• For the stereo optical adapter, the optical adapter confirmation screen or the initial stereo
adapter settings screen is displayed (see "Checking the stereo optical adapter" (page 105) ).
2 Make sure that the name of the optical adapter is correct.
3 The on-screen optical adapter name will disappear when the optical
adapter is removed.
To Next Page
Loading...
