1 Select a file that has a segment you
would like to play back repeatedly, and
start playback.
This function enables repeated playback of part of
the file being played.
2 Press the A-B REPEAT button at the
point you want to start segment repeat
playback.
• [w] will flash on the sub LCD.
Note
• I
f an index mark is placed or cleared during
segment repeat playback, segment repeat
playback will be canceled and it will return to
normal playback mode (☞
P.52).
Canceling the segment repeat playback function
A-B REPEAT
button
• Fast forwarding and rewinding can be
conducted when [w] is flashing in the same
manner as during normal playback, and
you can quickly proceed as far as the end
position (☞
P.49).
• When it reaches the end of the file while [w]
is flashing, point [x] becomes the end of
the file, and repeat playback will start.
3 Press the A-B REPEAT button again at
the position where you want to end
segment repeat playback.
• The recorder continuously plays back the
segment until the segment repeat playback
is canceled.
Pressing any of the following buttons will
release the segment repeat playback.
a P
ress the `OK or STOP (4) button
Pressing the `OK or STOP (4) button will
release segment repeat playback, and stop
playback.
b Press the 9 button
Pressing the 9 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the next file.
c Press the 0 button
Pressing the 0 button will release segment
repeat playback, and make the recorder to skip
to the beginning of the current file.
d Press the A-B REPEAT button
Pressing the A-B REPEAT button will release
segment repeat playback, and it will return to
normal playback mode.
How to begin segment repeat playback A n
How to begin segment repeat playback
A
n
To Next Page
Loading...
