Safety Accessories Supplementary Sheet
16 OMICRON
4 SAA1 Beeper Dongle
4.1 Designated use
The SAA1 Beeper Dongle generates an acoustic signal when the test system's outputs are activated. Since
CIBANO 500*, VOTANO 100, and TESTRANO 600 have an internal beeper, the SAA1 Beeper Dongle is
optimized for use with the CPC 80 and the CPC 100.
* NOTE! Some CIBANO 500 software versions do not support an internal beeper function.
Compatibility with main devices
SAA1 Beeper Dongle is intended to be used together with the following main devices:
• CIBANO 500
• CPC 80 / CPC 100
• TESTRANO 600
• VOTANO 100
See also the documents listed in the following table:
Table 5: Related documents to SAA1 Beeper Dongle
Title Description
SAA1 User Manual
Contains safety information and use case examples for the
SAA1 Beeper Dongle.
CIBANO 500 Getting Started
Contains safety information and use case examples for the
CIBANO 500 test system.
CIBANO 500 User Manual
Contains safety and operation instructions for the
CIBANO 500 test system.
CPC Getting Started
Contains safety information and use case examples for the
CPC 80 and CPC 100 test systems.
CPC 80 User Manual
Contains safety and operation instructions for the
CPC 80 test system.
CPC 100 User Manual
Contains safety and operation instructions for the
CPC 100 test system.
CPC 100 Reference Manual
Contains detailed hardware and software information for the
CPC 100 test system including relevant safety instructions.
CPC 100 PTM User Manual
Contains information on how to use Primary Test Manager (PTM)
with CPC 100 test system.
TESTRANO 600 Getting Started
Contains safety information and use case examples for the
TESTRANO 600 test system.
TESTRANO 600 User Manual
Contains safety and operation instructions for the
TESTRANO 600 test system.
VOTANO 100 Getting Started
Contains safety information and use case examples for the
VOTANO 100 test system.
VOTANO 100 User Manual
Contains safety and operation instructions for the
VOTANO 100 test system.
To Next Page
Loading...
Need help?
General