Omicron SAA1 User Manual

Safety Accessories Supplementary Sheet
42 OMICRON
7 CP Strobe Warning Lamp
7.1 Designated use
The CP Strobe
1
Warning Lamp flashes whenever the connected test system may carry dangerous voltages
and currents. The brightness is reduced when used in combination with the SAA1 Beeper Dongle on the
CPC 80/100.
Compatibility with main devices
The CP Strobe Warning Lamp is intended to be used together with the following main devices:
• CIBANO 500
• CPC 80 / CPC 100
• TESTRANO 600
See also the documents listed in the following table:
Table 27: Related documents to CP Strobe Warning Lamp
Title Description
CIBANO 500 Getting Started
Contains safety information and use case examples for the
CIBANO 500 test system.
CIBANO 500 User Manual
Contains safety and operation instructions for the
CIBANO 500 test system.
CPC Getting Started
Contains safety information and use case examples for the
CPC 80 and CPC 100 test systems.
CPC 80 User Manual
Contains safety and operation instructions for the
CPC 80 test system.
CPC 100 User Manual
Contains safety and operation instructions for the
CPC 100 test system.
CPC 100 Reference Manual
Contains detailed hardware and software information on the
CPC 100 including relevant safety instructions.
CPC 100 PTM User Manual
Contains information on how to use Primary Test Manager (PTM)
with CPC 100 test system.
TESTRANO 600 Getting Started
Contains safety information and use case examples for the
TESTRANO 600 test system.
TESTRANO 600 User Manual
Contains safety and operation instructions for the
TESTRANO 600 test system.
1
CP Strobe is discontinued and replaced by the SAA2

Omicron SAA1 Specifications

General

Brand	Omicron
Model	SAA1
Category	Safety Equipment
Language	English