Safety instructions
7 OMICRON
1.3 Operating the measurement setup
Before operating a Safety Accessory, read the safety instructions in this Supplementary Sheet carefully.
Do not turn on a Safety Accessory and do not operate a Safety Accessory without understanding the safety
information in this Supplementary Sheet. If you do not understand some safety instructions, contact
OMICRON before proceeding.
Maintenance and repair of the Safety Accessories is only permitted by qualified experts at OMICRON
Service Centers (see "Support" on page 48).
When handling and operating any Safety Accessory, observe the safety instructions in the User Manual of
the main device(s) with which you use the Safety Accessory with and the following additional safety
instructions:
Do not drop the Safety Accessory. Dropping the Safety Accessory may impair its operation.
Do not use the Safety Accessory submerged in oil or water or in locations continuously subject to
splashes of oil or water.
Use the Safety Accessory only in a dry environment.
Always lock connectors properly.
Do not operate the Safety Accessories under ambient conditions that exceed the temperature and
humidity limits listed in sections 4.7, 5.7, 6.7 and 7.7.
Do not operate the Safety Accessories in the presence of explosives, gas or vapors.
Always test the Safety Accessory under actual conditions before using it, as described in the
corresponding chapter of this Supplementary Sheet.
Do not insert objects (for example screwdrivers, etc.) into any input/output connector.
Immediately place damaged or malfunctioning devices out of service.
If in doubt, contact OMICRON technical support (see "Support" on page 48).
The Safety Accessories are only compatible with the specified OMICRON main devices (see
chapter 2 Compatibility with OMICRON test ).
If a Safety Accessory does not seem to function properly for any reason, stop using it and contact
OMICRON support (see Support on page 48).
1.4 Orderly measures
The Safety Accessories Supplementary Sheet or alternatively the e-book must always be available on site in
which the Safety Accessories are operated.
The users of the Safety Accessories must read this Supplementary Sheet before operating the Safety
Accessories and observe the safety, installation, and operation instructions therein.
The Safety Accessories described in this Supplementary Sheet are accessories designed to increase the
safety awareness and/or safety during operation of OMICRON test systems.
The Safety Accessories may only be used in accordance with this Supplementary Sheet and in accordance
with the user documentation of the connected OMICRON test system main device(s) (including but not
limited to User Manuals, Reference Manuals, Getting Started manuals and manufacturer manuals). The
manufacturer and the distributor are not liable for damage resulting from improper usage.
Opening the Safety Accessories or their accessories without authorization invalidates all warranty claims.
Any kind of maintenance or repair on the Safety Accessories or their accessories may only be carried out by
persons authorized by OMICRON.
To Next Page
Loading...
Need help?
General