Safety Accessories Supplementary Sheet
34 OMICRON
Table 19: Standards conformity
EMC, safety
EMC IEC/EN 61326-1 (industrial electromagnetic environment)
FCC subpart B of part 15, class A
Safety IEC/EN/UL 61010-1
Other
Shock IEC/EN 60068-2-27
(15 g / 11 ms, half-sinusoid, 3 shocks in each axis)
Vibration IEC/EN 60068-2-6
(frequency range 10 Hz…150 Hz, acceleration 2 g continuous
(20 m/s
2
/ 65 ft/s
2
), 20 cycles per axis)
Humidity IEC/EN 60068-2-78
(5%…95% relative humidity, non-condensing),
tested at 40 ºC / 104 ºF for 48 hours
Protection class
1
IP52, according to IEC/EN 60529
1. Does not apply to the 9-pin D-SUB connector.
To Next Page
Loading...