Omni 7000 Series - Page 183

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
7-48
Maintenance
2.
a. To end a batch through
OMNICONNECT, go to Section
3.6.4.
b. To end a batch through the front
panel, go to Batch Control/Ending
a Batch in Section 6.6.5.
3.
In OMNICONNECT, retrieve the
current configurations and save the file
to your PC:
a. If not currently online with the flow
computer, click the Online button
and connect to the unit.
b. In the Connect to OMNI window,
choose which unit to connect with
from the list presented.
c. Enter the appropriate user name
and password when prompted.
4.
a. Click the Receive button in the
Home ribbon to open the Receive
Data from OMNI Unit window
and receive the current
configuration from the
flow computer.
b. Click Start to receive the data
from the flow computer.