Omni 7000 Series User Manual

OMNI 4000/7000 Operations and Maintenance Guide – Rev F
6-17
Front Panel Operations
3.
a. Use the arrow keys to select one of
the following operations:
• Batch Control
(go to Section 6.6.5: Batch
Control/Ending a Batch)
• Edit Batch Stacks
(go to Section 6.6.5: Edit Batch
Stacks)
• Recalc Prev Batch
(go to Section 6.6.5: Recalculate
Previous Batches)
b. Press OK.
Batch Control/Ending a Batch
To access batch control operations, follow these instructions:
1.
a. From the Batch Operations screen,
select Batch Control.
b. Press OK.
2.
To view a current batch, use the Right or
Left arrow keys to select a Meter Run or
Station (at the top of the screen) currently
running a batch.
3.
Use the Up or Down arrow keys to scroll
through the list of details for that batch.

Omni 7000 Series Specifications

General

Brand	Omni
Model	7000 Series
Category	Desktop
Language	English