© 2011 Omnicell, Inc. External Return Bin Installation and Service Guide/67-2038 Rev D
Installation Instructions 2-15
Installation on G3 Cabinets
10. Slip the metal retaining bracket over the white connector and position it on the inside rear of
the metal rail.
Figure 2-39. Slipping on the retaining bracket
11. Snap on the black grommet over the outside ERB cable.
12. Push the grommet half-way through the second AUX opening.
13. Snap the metal retainer into the groove of the black grommet. The grommet covers the cable
so that the metal retainer snaps in the grommet groove and secures the cable to the inside back
of the electronic sled.
Figure 2-40. Snapping the grommet and retainer in place
Figure 2-41. Inside view of retainer snapped on grommet to secure the cable
To Next Page
Loading...