Omron 1S Series Startup Guide

45
10.
Delete Program0.
11.
Connect to the standard controller.
Change the connection method
Test the connection.
Confirm that Test OK is displayed and connect to the standard controller.
12.
Transfer to the standard controller.
Click the Synchronization Button to synchronize with the standard controller.
Transfer to the standard controller.

Omron 1S Series Specifications

General

Safety Function	STO (Safe Torque Off)
Motor Capacity	50 W to 15 kW
Output Power	50 W to 15 kW
Communication Interface	EtherCAT, MECHATROLINK-II/III
Feedback	Incremental Encoder
Operating Temperature	0 to +55°C
Protection Features	Overcurrent, Overvoltage
Ambient Humidity	20% to 90% RH (non-condensing)
Installation	Panel Mount
Weight	Varies by model
Storage Temperature	-20 to 85°C