Omron 1S Series -  Checking Operation of the STO Function

47
14.
The FSoE communications are now established.
The FS indicator is lit in green.
◼ Checking Operation of the STO Function
◼ Checking operation of the STO function using the Emergency Stop Pushbutton Switch
1.
Press the safety rest button.
2.
Press the Emergency Stop Pushbutton Switch.
Check that the 7-segment LED display shows ‘st’.
3.
Release the Emergency Stop Pushbutton Switch and press the safety rest button.
Check that STO is released and the 7-segment LED display shows ‘--’.