Omron 1S Series - 2. Before You Begin;  Unpacking;  Installing the Sysmac Studio Standard Edition Version 1.27 or higher

16
2. Before You Begin
◼ Unpacking
1.
Unpack the motor package.
The package includes only one Servomotor and the instruction sheet. Cables are
provided separately.
2.
Unpack the drive package.
The Servo Drive comes with the following accessories.
• INSTRUCTION MANUAL × 1 copy
• Warning label × 1 sheet
• General Compliance Information and instructions for EU × 1 copy
• Attached connector
◼ Installing the Sysmac Studio Standard Edition Version 1.27 or higher
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504) for details on how to
install the Sysmac Studio.
Additional Information
For further details on how to handle the drive and motor packages, refer to the Items to Check After
Unpacking in the 1S-Series AC Servomotors/Servo Drives with Built-in EtherCAT Communications and
Safety Functionality User’s Manual (Cat. No. I621).