• Set motor (electronic thermal) protection levels using parameters 3004Hex-0BHex to
3004Hex-0DHex. (For details, refer to 6-3-3 Motor Electronic Thermal Function on page 6-18
.)
• Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit
protection must be provided in accordance with the National Electric Code and any additional local
codes.
The inverter does not have motor overheat protection built in.
2 Design
2-84
M1 Series EtherCAT Type User’s Manual (I670)
To Next Page
Loading...
Need help?
General