Manual Configuration
This manual is compiled section by section for user’s convenience as follows.
Section Overview
Section 1 Overview This section provides an overview of the 3G3M1 Series
features, standard specifications, and external dimensions
by inverter capacity
.
It also shows the dif
ferences of this inverter from conven-
tional inverters for those who use previous models.
Section 2 Design This section describes the installation environment and
wiring methods.
Section 3 EtherCAT Communications This section describes EtherCAT communications on the
assumption of a connection with a Machine Automation
Controller NJ/NX Series CPU Unit.
Section 4 Inverter Control This section describes profiles for controlling the inverter.
Section 5 Operation and Test Run This section describes the operation method of this prod-
uct and the test run procedure.
Section 6 Basic Settings This section describes the basic functions such as the
Run command.
Section 7 Vector Control and Applied
Functions
This section describes the vector control and applied
functions characteristic of this inverter
.
Section 8
Other Functions This section describes the details of functions not descri-
bed in Section 6 or Section 7.
Section 9 Troubleshooting This section describes how to analyze the cause and take
countermeasures if the inverter fails, and provides trou-
bleshooting for possible troubles.
Section 10 Maintenance and Inspection This section describes the maintenance and periodical in-
spection items.
Appendix This section provides a description of profiles and a list of
objects for controlling the inverter
, and provides informa-
tion on Sysmac error status codes, derating, capacitor life
curve and inverter selection.
Manual Configuration
2
M1 Series EtherCAT Type User’s Manual (I670)
To Next Page
Loading...
Need help?
General