Omron 3G3M1-A4110-ECT - Page 649

Index
(hex)
Sub-
index
(hex)
Pa-
rame-
ter No.
Function name Monitor or data range
Default
data
Set-
ting
dur-
ing
RUN
Unit
PDO
map
4F X78 Last Alarm Info.
Running Status 3
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
0000 to FFFF hex
Bit 15: ---
Bit 14: OL (Overload warning)
Bit 13: LOC (Light load detection)
Bit 12: OL2 (Overload warning 2)
Bit 11: OLP (During active drive)
Bit 10: LIFE (Life warning)
Bit 9: OHF (Fin Overheat warning)
Bit 8: TRY (During retry)
Bit 7: FAN (Fan operation signal)
Bit 6: Reserved
Bit 5: THM (Thermal warning)
Bit 4: IPF (During restart after instan-
taneous power failure)
Bit 3: SETM (2nd motor selection)
Bit 2: IRDY (Operation ready)
Bit 1: FDT1 (Over set Frequency ar-
rival)
Bit 0: FAR1 (Constant speed arrival)
0 --- --- Possible
(TxPDO)
62 X97 Input Input Termi-
nal [PTC] Input
Voltage
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
0.0 to 12.0
0 --- V Possible
(TxPDO)
301A 09 X108 Latest Alarm In-
fo. Cumulative
Running Time
V/f DTV
PG V/f PG DTV
SLV PGV PM SLV PM PGV
0 to 655,350
0 --- h Possible
(TxPDO)
13 X118 Last Alarm Info.
Cumulative Run-
ning time
1D X128 Second last
Alarm Info. Cu-
mulative Running
time
27 X138 Third last Alarm
Info. Cumulative
Running time
Appendices
A-103
M1 Series EtherCAT Type User’s Manual (I670)
A-4 Lists of Manufacturer Specific Objects 2
(Inverter Parameters)
A
A-4-4 X Group Parameter List (Alarm Information 2)