Omron CJ2 CPU UNIT - Pulse I;O Modules (CJ2 M CPU Unit Only); Models and Specifications; Part Names and Functions

3-17
3 Nomenclature and Functions
CJ2 CPU Unit Hardware User’s Manual
3-3 Pulse I/O Modules (CJ2M CPU Unit Only)
3
3-3-1 Models and Specifications
3-3 Pulse I/O Modules (CJ2M CPU Unit
Only)
Note Connectors are not provided with Pulse I/O Modules.
Purchase the following Connector, an OMRON Cable with Connectors for Connector-Terminal Block Conver-
sion Units, or an OMRON Cable with Connectors for Servo Relay Units.
(Refer to the 2-1-2 CPU Rack, 5-3 Wiring, or the CJ2M CPU Unit Pulse I/O Module User's Manual (Cat.
No. W486) for details.)
3-3-1 Models and Specifications
Model
Type of transis-
tor outputs
Specifications
CJ2M-MD211 Sinking outputs 1 MIL connector
• 10 inputs (four interrupt/quick-response inputs or two high-speed
counter inputs)
• 6 outputs (two pulse outputs or two PWM outputs)
CJ2M-MD212 Sourcing outputs
Name Model Specifications
MIL Flat Cable Connector for Pulse
I/O Modules
XG4M-4030-T 40-pin MIL connector, pressure-
welded type (This connector is used
by user to make a cable.)
3-3-2 Part Names and Functions
Part Names
Pulse I/O
MIL connector (40 pins)
I/O indicators
Indicate the ON/OFF status of the
pulse I/O signals.