Omron CJ2 CPU UNIT - Connecting Via the Peripheral (USB) Port; CX-Programmer Connections

6-31
6 Troubleshooting
CJ2 CPU Unit Hardware User’s Manual
6-3 Non-CPU Unit Errors and Remedies
6
6-3-1 Error Causes and Remedies
Use the following procedure if the CX-Programmer cannot be connected.
z Connecting via the Peripheral (USB) Port
CX-Programmer Connections
The CX-Programmer
cannot connect.
Is the USB cable
securely
connected?
No
No
No
No
Insert the cable all the way in at
both the personal computer and at
the CPU Unit.
Yes
Yes
Yes
Yes
Can the
CX-Programmer be
connected online?
End
Is the
CX-Programmer
network type set
to USB?
Set the CX-Programmer network
type to USB.
Can the
CX-Programmer be
connected online?
Replace the USB cable.