Omron CJ2 CPU UNIT - Connecting Pulse I;O Modules to the CPU Unit; Pulse I;O Module Detection

3 Nomenclature and Functions
3-18
CJ2 CPU Unit Hardware User’s Manual
Up to two Pulse I/O Modules can be connected to a CJ2M CPU Unit.
They must be connected immediately to the left of the CPU Unit.
The Pulse I/O Module closest to the CPU Unit is Pulse I/O Module 0 and the other one is Pulse I/O
Module 1.
The CPU Unit will automatically detect the Pulse I/O Modules that are connected when the power sup-
ply is turned ON. The Pulse I/O Modules are therefore not registered in the I/O tables.
An error will not occur when power is turned ON even if there is a different number of Pulse I/O Modules
connected or different models of Pulse I/O Modules connected.
Connecting Pulse I/O Modules to the CPU Unit
One Pulse I/O Module Two Pulse I/O Modules
Pulse I/O Module Detection
Pulse I/O Module
CJ2M CPU Unit
(Standard or
Simple Model)
Connected
Pulse I/O Module 0
Pulse I/O Modules
CJ2M CPU Unit
(Standard or
Simple Model)
Pulse I/O Module 0
Pulse I/O Module 1
Connected
Connected