Omron CJ2 CPU UNIT - Basic Mixed I;O Units; Reading Terminal Connection Diagrams

Appendices
A-4
CJ2 CPU Unit Hardware User’s Manual
z Basic Mixed I/O Units
Note For details on the connectors included with the Unit, refer to the information provided under Accessories in
the tables for Basic I/O Units in the following pages.
• I/O terminals in terminal connection diagrams are shown as viewed from the front panel of the Unit.
• Terminal numbers A0 to A9 and B0 to B9 are used in this manual, but they are not printed on all
Units.
• A0 to A20 and B0 to B20 are printed on the Units.
Type of
Unit
Name Specifications Model Page
Mixed I/O
Units
24-VDC
Inputs/Transis-
tor Output Units
Sinking
output
Fujitsu-compatible connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.5 A
16 inputs
16 outputs
CJ1W-MD231 A-45
MIL connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.5 A
CJ1W-MD233 A-47
Fujitsu-compatible connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.3 A
32 inputs
32 outputs
CJ1W-MD261 A-49
MIL connector
Inputs: 24 VDC
Outputs: 12 to 24 VDC, 0.3 A
CJ1W-MD263 A-51
Sourcing
output
MIL connector
Input: 24 VDC
Outputs: 24 VDC, 0.5 A, load short-cir-
cuit protection
16 inputs
16 outputs
CJ1W-MD232 A-53
TTL I/O Units Inputs: 5 VDC
Outputs: 5 VDC, 35 mA
32 inputs
32 outputs
CJ1W-MD563 A-55
Precautions on Contact Output Units A-57
Load short-circuit protection and line disconnection detection for CJ1W-OD202 A-149
Load short-circuit protection for CJ1W-OD204/OD212/OD232/MD232 A-151
Reading Terminal Connection Diagrams