2-7
2 Basic System Configuration and Devices
CJ2 CPU Unit Hardware User’s Manual
2-1 Basic System Configuration
2
2-1-2 CPU Rack
Pulse I/O Modules (CJ2M CPU Unit Only)
Serial Option Boards (CJ2M-CPU3@ Only)
* The following modes cannot be used: 1:1 NT Link, Serial Gateway converted to Host Link FINS, 1:1 Link Master,
and 1:1 Link Slave.
z CJ-series Power Supply Units
Model Specifications
Current consumption (A)
Weight
5 VDC 24 VDC
CJ2M-MD211 Sinking outputs, MIL connector
10 inputs (including four interrupt/quick-
response inputs and two high-speed counter
inputs)
6 outputs (including two pulse outputs and
two PWM outputs)
0.08 --- 70 g
CJ2M-MD212 Sourcing outputs, MIL connector
10 inputs (including four interrupt/quick-
response inputs and two high-speed counter
inputs)
6 outputs (including two pulse outputs and
two PWM outputs)
0.08 --- 70 g
Name Model Specifications
Serial com-
munications
mode
Current consumption
(A)
Weight
5 VDC 24 VDC
RS-232C
Option Board
CP1W-CIF01 Mounted in the Option
Board slot in the
CJ2M-CPU3@ to
enable using an RS-
232C port.
Maximum transmis-
sion distance: 15 m
Host Link, 1:N
NT Link, No-
protocol, Serial
PLC Link
Slave, Serial
PLC Link Mas-
ter, Serial
Gateway con-
verted to Com-
poWay/F, and
Tool Bus*
0.005 A --- 20 g
RS-422A/485
Option Board
CP1W-CIF11 Mounted in the Option
Board slot in the
CJ2M-CPU3@ to
enable using an RS-
422A/485 port.
Maximum transmis-
sion distance: 50 m
0.030 A --- 20 g
Isolated RS-
422A/485
Option Board
CP1W-CIF12 Mounted in the Option
Board slot in the
CJ2M-CPU3@ to
enable using an RS-
422A/485 port.
Maximum transmis-
sion distance: 500 m
0.075 A --- 30 g
Model
Power supply
voltage
Output capacity
Additional
functions
Weight
5 VDC 24 VDC
CJ1W-PA205R 100 to 240 VAC 5.0 A 0.8 A RUN output 350 g max.
CJ1W-PA205C 100 to 240 VAC 4.6 A 0.8 A Replacement
notification
400 g max.
CJ1W-PA202 100 to 240 VAC 2.8 A 0.4 A --- 200 g max.
CJ1W-PD025 24 VDC 5.0 A 0.8 A --- 335 g max.
CJ1W-PD022 24 VDC (non-
insulated type)
2.0 A 0.4 A --- 130 g max.