2-9
2 Basic System Configuration and Devices
CJ2 CPU Unit Hardware User’s Manual
2-1 Basic System Configuration
2
2-1-2 CPU Rack
* CJ2H-CPU6@-EIP or CJ2M-CPU3@ only.
Others
Name Model Specifications
DIN Track PFP-50N Track length: 50 cm, height: 7.3 mm
PFP-100N Track length: 1 m, height: 7.3 mm
PFP-100N2 Track length: 1 m, height: 16 mm
PFP-M Stopper to prevent Units from moving on the track.
Two each are provided with the CPU Unit and with
an I/O Interface Unit.
Programming Device Connecting
Cable for peripheral (USB) port
Commercially avail-
able USB cable
USB 2.0 (or 1.1) cable (A connector - B connec-
tor), 5.0 m max.
Programming Device Connecting
Cables for serial port
XW2Z-200S-CV Connects to IBM PC/AT computer
D-Sub 9-pin connector (Cable length: 2.0 m).
Uses static-resistant connector.
XW2Z-500S-CV Connects to IBM PC/AT computer
D-Sub 9-pin connector (Cable length: 5.0 m).
Uses static-resistant connector.
XW2Z-200S-V Connects to IBM PC/AT computer
D-Sub 9-pin connector. (Cable length: 2.0 m)
XW2Z-500S-V Connects to IBM PC/AT computer
D-Sub 9-pin connector. (Cable length: 5.0 m)
Connecting Cable for EtherNet/IP
port*
Commercially avail-
able 100Base-TX
twisted-pair cable
Recommended: Fujikura F-LINK-E 0.5 mm × 4P
Twisted-pair cable with RJ45 Modular Connectors
on both ends. Connect between EtherNet/IP Unit
or built-in EtherNet/IP port and Ethernet switch.
Use STP (shielded twisted-pair) cable of category
5 or 5e.
Communications Adaptor (RS-422A
Converter)
CJ1W-CIF11 Current consumption at 5 V: 0.04 A
RS-232C/RS-422A Link Adapter NT-AL001 Maximum distance: 500 m; only RS-422A is sup-
ported.
Current consumption at 5 V: 0.15 A
MIL Flat Cable Connector for Pulse
I/O Modules
XG4M-4030-T 40-pin MIL connector, pressure-welded type (This
connector is used by user to make a cable.)
Connector-Terminal Block Conver-
sion Units
XW2D-40G6 Slim model (M3 screw terminals), 40 terminals
XW2B-40G5 Through model (M3 screw terminals), 40 termi-
nals
XW2B-40G4 Through model (M3.5 screw terminals), 40 termi-
nals
Connector-Terminal Block Conver-
sion Cables
XW2Z-100K Cable length: 1 m
XW2Z-150K Cable length: 1.5 m
XW2Z-200K Cable length: 2 m
XW2Z-300K Cable length: 3 m
XW2Z-500K Cable length: 5 m
Servo Relay Units XW2B-20J6-8A To connect one axis
XW2B-20J6-9A To connect two axes
To Next Page
Loading...
