Omron CX-DESIGNER - INTRODUCTION GUIDE - Starting Up CX-Designer

2. Starting up the CX-Designer
2. Starting up the CX-Designer
Select [Start]-[Program]-
[Omron]-[CX-One]
-[CX-Designer]
-[CX-Designer Ver. xx]
(CX-Designer Ver. 1.0
is used here.)
When the CX-Designer is started up, the main window will appear.
Start up
CX-D
Creating a
new project
Project
property
System
setting
Creating
a screen
Validation
Transferring
a project