Entering project title and labels
CX-Designer
CX-Designer
NS8-V1
NS8-V1
Host side (PLC)
Host side (PLC)
Installing CX-Designer to a
personal computer
Starting up the CX-
Designer
Starting up the CX-
Designer
Setting Project
Properties
System Setting
Allocate system memory,
set communication port etc...
Mount NS on
the control panel
Connecting power supply/
communication cable
Power ON
System Menu Setting
System Menu Setting
Creating a Screen
Data
Creating lamp, touch switch,
numeral display and graph
etc...
Test/ Validation
Setting communication
port
Setting communication
port
Power ON
Transferring the screen data to NS Hardware
Transferring the screen data to NS Hardware
Checking errors on the CX-
Designer
Creating Ladder program
Start Operation
Start Operation
Maintenance and Inspection
Maintenance and Inspection
Operation Flow
Creating a screen
Creating a screen
Refer to NS
Setup Manual
Refer to NS
Setup Manual
Refer to NS
Setup Manual
To Next Page
Loading...
