Omron CX-DESIGNER - INTRODUCTION GUIDE - Setting Project Properties

4. Setting project properties
4. Setting project properties
Making settings for a project data.
In this section, you will make a project that is able to show two
language labels – English and Dutch by switching them. Here, it is necessary
to set a project property for a label switching function is required.
Click the [System] tab
in the project workspace.
Double-click [Project
Property]
Click the [Switch
Label] tab.
Set 0 to Label No. and
enter English
as a label name.
Set 2 for No. of
Labels.
Click
Set 1 to Label No. and
enter Dutch
as a label name.
Start up
CX-D
Creating a
new project
Project
property
System
setting
Creating
a screen
Validation
Transferring
a project