Omron CX-DESIGNER - INTRODUCTION GUIDE - Page 38

Click
Change texts by
referring to
“11-2 Repeat Function
(Text)”.
Enter as follow:
English (OFF)
! “Unit 1 Stopped”
to “Unit 5 Stopped”
English (ON)
! “Unit 1 Running”
to “Unit 5 Running”
Dutch (OFF)
! “Unit1 Inactief”
to “Unit5 Inactief”
Dutch (ON)
! “Unit1 Actief”
to “Unit5 Actief”
Bit lamp labels are
changed.
Change a lamp type for
Units 2 to 5 on the
property list in the same
way you created “Unit 1
Stopped”.
Start up
CX-D
Creating a
new project
Project
property
System
setting
Creating
a screen
Validation
Transferring
a project