Omron CX-DESIGNER - INTRODUCTION GUIDE - Page 48

Create6 bit lamps by
referring to “11. Repeat
function”.
Click
Create a bit lamp by
referring to “12. Bit Lamp”.
Set [Display Address 1]
from the property list as
follow:
Host
! [HOST 1]
Area
! [Common I/O Area
(CIO)]
Word
! [2]
Bit
! [0]
[Type]
! Double-lined Circle
Select [Color 1] and [Color 2]
Set as follow:
[Qty]
Horizontal
! “2”
Vertical
! “3”
[Spacing]
Horizontal
! 125”
Vertical
! “6”
Repeat direction
Set “1” to [Offset
Address]
Start up
CX-D
Creating a
new project
Project
property
System
setting
Creating
a screen
Validation
Transferring
a project