Omron CX-DESIGNER - INTRODUCTION GUIDE - Page 72

Create a screen switching
button (CMD button)
labeled as Screen 1 to
Screen 3 in the way you
made “Virtual Alarm
Display”.
Click the PUSH button on
the right side of [Function]
to display the dialog. Set
each button as follow:
[Screen 1]
[Specified Screen]
! “0000: Screen 1”
[Screen 2]
[Specified Screen]
! “0001: Screen 2”
[Screen 3]
[Specified Screen]
! “0002: Screen 3”
Create two labels as shown
on the right by referring
to “9. Displaying a Text”.
[Label]
! “Word Button”
[Label]
! “Command Button”
Click the Apply
Sheet button.
Start up
CX-D
Creating a
new project
Project
property
System
setting
Creating
a screen
Validation
Transferring
a project