Omron E5AR - MANUAL 2 User Manual

Section 8 Setting data
8-4
Setting data
• Initial setting protect
Restricts movement to the Input initial setting, Control initial setting,
Control initial setting 2, Alarm setting, Display adjustment, and
Communication setting level.
• When "Initial setting level protect" is set to "2", nothing happens
when the level key is held down for 1 second to move to Input initial
setting level from Operation, Adjustment, Adjustment 2, Bank
setting, PID setting, Approximation setting, or Monitor item level.
(The blinking display to indicate the move does not appear.)
• Setting change protect
Prevents use of the UD keys.
• "Setting change protect" is initially set to "OFF".
• PF key protect
Prevents use of the PF1/PF2 keys.
• "PF key protect" is initially set to "OFF".
Function
Setting
Setting
values
Move to Input initial
setting level
Move to Control initial setting,
Control initial setting 2, Alarm
setting, Display adjustment, and
Communication setting level
0
Yes (shows "Advanced
function setting level")
Ye s
1
Yes (Does not show
"Advanced function
setting level")
Ye s
2No No
Function
Setting
Setting
value
Change settings by key
operation
Remarks (exceptions)
OFF Yes −
ON No
• All setting data on Protect level
• "Move to special function level"
• "Move to calibration level"
• "Display bank selection"
• "Display PID selection"
Function
Setting
Setting
value
Change settings by key operation
OFF PF1/PF2 keys are enabled
ON
PF1/PF2 keys are disabled (operation as a function key and
channel key is disabled)

Omron E5AR - MANUAL 2 Specifications

General

Brand	Omron
Model	E5AR - MANUAL 2
Category	Controller
Language	English