Omron E5AR - MANUAL 2

8.11 Control initial setting 2 level (l.2)
8-45
Setting data
8.11 Control initial setting 2 level (l.2)
This level contains initial settings for computational functions, including Control/Transfer output
assignment, event input assignment, auxiliary output assignment, and first order lag operation enable/
disable.
Adjustment
level
Operation level
L key Less
than 1 second
L key
1 second
or more
L key
3 seconds
or more
Adjustment 2
level
L key Less
than 1 second
PID setting
level
Bank setting
level
25.0
0.0
0.0
Control in progress
L key Less
than 1 second
L key less than 1 second
L key Less
than 1 second
L key Less
than 1 second
Approximation
setting
level
Control initial
setting
level
Input initial setting
level
L key Less
than 1 second
Control initial setting
2 level
L key Less
than 1 second
Display adjustment
level
Alarm setting
level
L key Less
than 1 second
L key less than 1 second
L key Less
than 1 second
L key Less
than 1 second
Communication
setting
level
Control stops.
Control stop
l. adj
l. ad2
l. bnk
l. pid
l. tec
l. 0
l. 1
l. 2
l. 3
l. 4
l. 5
Power on
0
M
M
M
M
M
M
M
EV.1: Event input 1 allocation
0 - 25
EV.6: Event input 6 allocation
0 - 25
SBO.1: Auxiliary output 1 allocation
0 - 36
SBO.4: Auxiliary output 4 allocation
0 - 36
TRH.1: Transfer output 1 upper limit
TRL.1: Transfer output 1 lower limit
TRH.2: Transfer output 2 upper limit
OUT.1:
Control / Transfer output 1 allocation
0 - 32
1
0
OUT.4:
Control / Transfer output 4 allocation
0 - 32
M
M
1
4
M
M
M
TRL.2: Transfer output 2 lower limit
TRH.4:
Transfer output 4 upper limit
HRL.4:
Transfer output 4 lower limit
LAG.1:
First order lag operation 1 enabled
OFF/ON
off
off
LAG.4:
First order lag operation
4 enabled
OFF/ON
M
M
MAV.1:
Movement average 1
enabled OFF/ON
off
off
MAV.4:
Movement average 4
enabled OFF/ON
SQR.1:
Extraction of square
root 1 enabled
OFF/ON
off
off
SQR.4:
Extraction of square
root
4 enabled
OFF/ON
SCL1: Straight-line
approximation 1 enabled
OFF/ON
SCL2: Straight-line
approximation 2 enabled
OFF/ON
l.2
TRH.3:
Transfer output 3 upper limit
30
off
CALB:
Motor calibration
OFF/ON
MOT: Travel time
1 - 999
0
CH
CH
M
M
M
FNC.1:
Broken-line approximation 1 enabled
OFF/ON
off
M
Control initial setting 2 level
TRL.3:
Transfer output 3 lower limit
on
on