Omron E5AR - MANUAL 2 User Manual

8.3 Operation level ( )
8-5
Setting data
8.3 Operation level ( )
Display this level to operate the control system. The SP can be set and the PV monitored in this level.
• This sets the MV or valve opening during manual operation. On a
standard type the MV is changed by pressing the UD keys. On a
position proportional type, the U key turns on "open" and the D key
turns on "close".
• On a standard type Display 1 shows the PV and Display 2 shows the
MV.
Manual MV
Manual operation
Adjustment
level
L key less
than 1 second
L key less
than 1 sec
L key less
than 1 second
Adjustment 2
level
L key less
than 1 second
PID setting
level
Approximation
setting
level
L key less
than 1 second
Bank setting
level
L key less
than 1 second
Control in
progress
l. adj
l. ad2
l. bnk
l. pid
l. tec
Power on
Operation level
25 . 0
0.0
M
PV / manual MV
(Position proportional control type:
PV / valve opening)
manu
25 . 0
0.0
M
PV / SP (display 1)
PV / SP / bank No.
bnk.0
25 . 0
0.0
M
PV / SP (display 2)
Present / SP /
MV
25 . 0
0.0
M
PV / SP (display 3)
Present / SP / bank No.
rsp
0.0
M
RSP: Remote SP monitor
sp-m
0.0
M
SP-M: Ramp SP monitor
0.0
bnk.0
∗1
∗2
CH
CH
CH
CH
CH
CH
Operation Level
o
0.0
M
M
O: MV monitor (heating)
-m
0.0
M
V-M: Valve opening monitor
r-s
run
M
M
R-S:RUN/STOP
a-m
auto
A-M:AUTO/MANU
∗1 In manual mode
∗2 One of the following is displayed depending on
the "Display screen selection" setting:
• Display 1 / Display 2
• Display 2 / Display 3
• Display 1 only
• Display 2 only
c-o
0.0
M
C-O: MV monitor (cooling)
CH
CH
CH
CH
CH
CH
manu
Function

Omron E5AR - MANUAL 2 Specifications

General

Brand	Omron
Model	E5AR - MANUAL 2
Category	Controller
Language	English