Omron E5AR - MANUAL 2

8.8 Approximation setting level (l.tec)
8-33
Setting data
8.8 Approximation setting level (l.tec)
This level contains straight-line and broken-line approximation settings. These settings only appear if
enabled in Control initial setting 2 level.
Use these settings to configure straight-line approximation 1 and 2.
• Set values for straight-line approximation. Specify two points:
straight-line approximations 1 and 2. Use normalized data for the
values.
•
If Input 1 = Input 2, the setting will not be effective and will be
regarded as straight-line approximation with input data = output data.
Straight-line approximation ∗ Input 1
Straight-line approximation
∗ Input 2
Straight-line approximation
∗ Output 1
Straight-line approximation
∗ Output 2
(
∗ : 1 or 2)
si1. ∗
si2. ∗
so1. ∗
so2. ∗
Straight-line approximation ∗ is enabled
Adjustment
level
Operation level
L key less
than 1 second
L key less
than 1 sec
L key less
than 1 second
Adjustment 2
level
L key less
than 1 second
PID setting
level
Approximation
setting
level
L key less
than 1 second
Bank setting
level
L key less
than 1 second
Control in
progress
l. adj
l. ad2
l. bnk
l. pid
l. tec
Power on
0.000
fi01.1
0.000
M
si2.1
si1.1
so1.1
so2.
1.000
0.000
1.000
0.000
M
M
M
fi20.1
M
fo01.1
fo20.1
M
SI1.1:Straight-line approximation 1
Input 1
-1.999 - 9.999
SI2.1:Straight-line approximation 1
Input 2
-1.999 - 9.999
SO1.1:Straight-line approximation 1
Output 1
-1.999 - 9.999
SO2.2:Straight-line approximation 2
Output 2
-1.999 - 9.999
M
si2.
si1.
so1.
so2.1
1.000
0.000
1.000
0.000
M
M
M
SI1.2:Straight-line approximation 2
Input 1
-1.999 - 9.999
SI2.2:Straight-line approximation 2
Input 2
-1.999 - 9.999
SO1.2:Straight-line approximation 2
Output 1
-1.999 - 9.999
SO2.1:Straight-line approximation 1
Output 2
-1.999 - 9.999
FIO1.1: Broken-line approximation 1
Input 1
-1.999 - 9.999
FI20.1: Broken-line
approximation 1
Input 20
-1.999 - 9.999
FO01.1: Broken-line approximation 1
Output 1
-1.999 - 9.999
FO20.1: Broken-line
approximation 1
Output 20
-1.999 - 9.999
0.000
0.000
0.000
l.tec
Approximation setting level
2
2
2
2
l.tec
Function
Output value 2
Output value 1
Input value 1 Input value 2