Omron E5AR - MANUAL 2 User Manual

Section 8 Setting data
8-34
Setting data
● Related setting data
"Straight-line approximation 1 enable", "Straight-line approximation 2
enable" (Control initial setting 2 level) (P.8-51)
Use these settings to set values for broken-line approximation 1.
• Set values for broken-line approximation. Up to 20 points can be
specified for one broken line approximation. Use normalized data for
the values.
• If Input n
≥ Input n + 1, the setting of point "n + 1" will not be
effective.
● Related information
"5.1 Input adjustment functions ■ Broken-line approximation" (P.5-6)
● Related setting data
"Broken-line approximation 1 enable" (Control initial setting 2 level)
(P.8-51)
Setting
Setting data Setting range Units Default value
Straight-line approximation ∗ Input 1
-1.999 to 9.999
− 0.000
Straight-line approximation ∗ Input 2
-1.999 to 9.999
− 1.000
Straight-line approximation ∗ Output 1
-1.999 to 9.999
− 0.000
Straight-line approximation ∗ Output 2
-1.999 to 9.999
− 1.000
Reference
Reference
Broken-line approximation 1 Input 1 to
Broken-line approximation 1 Input 20
Broken-line approximation 1 Output 1 to
Broken-line approximation 1 Output 20
fi01.1 to fi20.1
fo01.1 to fo20.1
Broken-line approximation ∗
is enabled
l.tec
Function
Input 2
6-point broken-line approximation characteristics
P2
Output 2
Input 3 Argument 1 (Input data)
P3
P4
P6
P5
Output 3
P5 disabled because
Input 5 ≤ Input 4
Operation result
Input 1
P1
P7 to 20
(Disabled)
Output 1
Setting
Setting data Setting range Units Default value
Broken-line approximation ∗ Input 1 to
Broken-line approximation ∗ Input 20
-1.999 to 9.999 − 0.000
Broken-line approximation ∗ Output 1 to
Broken-line approximation ∗ Output 20
-1.999 to 9.999 − 0.000
Reference
Reference

Omron E5AR - MANUAL 2 Specifications

General

Brand	Omron
Model	E5AR - MANUAL 2
Category	Controller
Language	English