Omron NE1A Series - Command Reference: Logic Functions; Logic Function: and; Logic Function: NOT

117
Command Reference: Logic Functions Section 6-4
6-4 Command Reference: Logic Functions
6-4-1 Logic Function: NOT
Diagram
General Description
The output will be the inverse of the input.
Truth Table
0: OFF, 1: ON
6-4-2 Logic Function: AND
Diagram
Default Connections
General Description
An AND of the input conditions will be output. Up to eight input conditions can
be evaluated.
Optional Input Settings
The number of inputs can be increased on the In/Out Setting Tab Page in the
function block property dialog box.
Input 1 Output 1
01
10
Parameter Setting range Default setting
Number of inputs 1 to 8 2