93
Common Functions Section 5-1
Each I/O point’s accumulated contact operations count can be cleared. To
clear the count, select the contact operations count to be cleared and click the
Clear Value Button.
5-1-4 Total ON Time Monitor Function
Overview
In NE1A-series Controllers with unit version 1.0 or later, this function times
how long a local input, test output, or local output is ON and stores that total
ON time internally in non-volatile memory.
• Count range: 0 to 4,294,967,295 s (stored as 00000000 to FFFFFFFF
Hex)
• Count units: Seconds
This information can be monitored using the Network Configurator or explicit
messaging.
Total ON time
Sensor
I/O power supply
Total ON time
Connected device
To Next Page
Loading...
