Omron NE1A Series - Confirming the Operating Mode

183
NE1A-series Controller Operating Modes Section 8-1
8-1-2 Confirming the Operating Mode
Confirming with the MS Indicator
The user can confirm the operating mode using the MS indicator on the front
of the NE1A-series Controller.
: ON : Flashing : OFF
Confirming with the Operating Mode Flag
The user can determine whether the NE1A-series Controller’s operating
mode is RUN Mode or not by checking bit 6 (Operating Mode Flag) of the Unit
General Status.
MS (module status) indicator
Indicator name Color State Meaning
MS
(module status)
Green RUN Mode
IDLE Mode
Red Critical error
Abort
Green/
red
Self-diagnosis, waiting for TUNID setting, or waiting for
configuration.
- Power is not supplied.