Omron NE1A Series - Logic Function: Routing

153
Command Reference: Function Blocks Section 6-5
Maximum Number of I/O for a External Device Monitoring Function Block
Error Handling and Error Resetting
Timing Chart
6-5-11 Logic Function: Routing
Diagram
Default Connections
Error Behavior for error detection Resetting the error
condition Outputs 1
and 2
Fault
Present
Error output condition
EDM feedback
time error
OFF (safety
state)
ON EDM Error output: ON Remove the cause of
the error and turn ON
the safety input.
Monitored
input
Output1
EDM
Feedback
EDM Error
Fault
Present
Output2
Idle
to RUN
TEDM TEDM TEDM TEDM TEDM