57
Remote I/O Allocations Section 4-3
4-3 Remote I/O Allocations
4-3-1 Remote I/O Area Allocation Overview
The remote I/O areas used in Safety Masters/Slaves and Standard Masters/
Slaves are automatically allocated in the NE1A-series Controller’s I/O mem-
ory according to settings made from the Network Configurator. I/O of the des-
tination communications slave and the I/O area for an NE1A-series slave are
displayed as I/O tags. Using I/O tags allows a user to program without being
conscious of the NE1A-series Controller’s memory addresses.
I/O of the registered slave is displayed as I/O tags.
Programming with I/O tags
To Next Page
Loading...
