Omron NE1A Series - Page 126

127
Command Reference: Logic Functions Section 6-4
Truth Table
■ Truth Table for Comparator Evaluation (CV = Comparison Value):
0: OFF; 1: ON, ?: Either ON or OFF
Note “= CV for Bit n” indicates that the bit matches the comparison value.
“≠ CV for Bit n” indicates that the bit does not match the comparison value.
”
×” indicates the status is not applicable (may match or not match).
Input1 Input2 Input3 Input4 Input5 Input6 Input7 Input8 Output1
≠
CV for
Bit 0
× × × × × × × 0
×
≠
CV for
Bit 1
× × × × × × 0
× × ≠
CV for
Bit 2
× × × × × 0
× × × ≠
CV for
Bit 3
× × × × 0
×
× × × ≠
CV for
Bit 4
× × × 0
× × × × × ≠
CV for
Bit 5
× × 0
× × × × × × ≠
CV for
Bit 6
× 0
×
× × × × × × ≠
CV for
Bit 7
0
=
CV for
Bit 0
=
CV for
Bit 1
=
CV for
Bit 2
=
CV for
Bit 3
=
CV for
Bit 4
=
CV for
Bit 5
=
CV for
Bit 6
=
CV for
Bit 7
1