Omron NE1A Series - Page 175

176
Command Reference: Function Blocks Section 6-5
Optional Output Settings
The number of outputs can be increased on the In/Out Setting Tab Page in the
function block property dialog box.
Maximum Number of outputs for a Multi Connector Logic Function
Truth Tables
■ Multi Connector Truth Table:
0: OFF, 1: ON, x: Either ON or OFF
Parameter Setting range Default setting
Number of inputs 1 to 8 1
Input Output
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
0xxxxxxx0 x x x x x x x
1xxxxxxx1 x x x x x x x
x0xxxxxxx 0 x x x x x x
x1xxxxxxx 1 x x x x x x
xx0xxxxxx x 0 x x x x x
xx1xxxxxx x 1 x x x x x
xxx0xxxxx x x 0 x x x x
xxx1xxxxx x x 1 x x x x
xxxx0xxxx x x x 0 x x x
xxxx1xxxx x x x 1 x x x
xxxxx0xxx x x x x 0 x x
xxxxx1xx
x x x x x 1 x x
xxxxxx0xx x x x x x 0 x
xxxxxx1xx x x x x x 1 x
xxxxxxx0x x x x x x x 0
xxxxxxx1x x x x x x x 1