19
Nomenclature and Functions Section 2-1
NE1A-SCPU01 (Unit Version 1.0 or Later)
Terminal area
Indicator area
Terminal area
Baud rate switch:
Sets the DeviceNet baud rate.
DeviceNet communications connector:
Connects to the network communications cable.
The power for communications is also supplied from this connector.
The XW4G-05C1-H1-D Connector is
rovided for node connections.
USB port
(B connector)
Node address switches:
Sets the DeviceNet node address
as a 2-digit decimal number.
Indicator/display area
To Next Page
Loading...
