7 Tag Data Link Functions
7-28
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
3
You can change tag set names in this dialog box. To confirm a change, click the Regist Button in
the Edit Tag Set Dialog Box.
4
Perform steps 1 to 3 for all the devices to import variables and to create tag sets.
After you create the tag sets, click the Connections Tab at the top of the Edit Device Parameters Dialog
Box, and set the following connection information.
• The target devices with which connections are opened
• Whether the tag sets are input or output tag sets
• The length of the packet intervals (RPI)
Make the connections settings in the originator only. The connections settings are not necessary in the
target device.
Precautions for Correct UsePrecautions for Correct Use
Make the connections settings after you create tag sets for all of the devices involved in tag data
links.
7-2-5 Connection Settings
To Next Page
Loading...
