5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-2
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
5-1 TCP/IP Display
z Setting the IP Addresses
* These settings are required if you select
Fixed setting.
z DNS
* These settings are required when DNS is used.
Setting Description Default
IP Address Select the setting method for the IP address for the built-in
EtherNet/IP port.
• Fixed setting
• Obtain from BOOTP server.
• Fix at the IP address obtained from BOOTP server.
Fixed setting
IP address
*
Set the IP address for the built-in EtherNet/IP port. 192.168.250.1
Subnet mask
*
Set the subnet mask for the built-in EtherNet/IP port. 255.255.255.0
Default gateway
*
Set the IP address of the default gateway for the built-in
EtherNet/IP port. This setting is not required when the
default gateway is not used.
None
Setting Description Default
DNS Set whether to specify the host name in the DNS server in
CIP communications and socket instructions to specify the
remote communications node instead of the IP address.
A DNS server is required to use DNS.
Use/Do not use.
Do not use.
Priority DNS server
*
Set the IP address of the DNS server. You can set priority
and secondary IP addresses.
None
Secondary DNS server None
Domain name
*
Sets the domain name of the domain to which the built-in
EtherNet/IP port belongs. The built-in EtherNet/IP port
does not use a domain name in actual communications.
(Single-byte alphanumeric characters, dots, and hyphens:
48 characters max.)
None
To Next Page
Loading...
