Appendices
A-4
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
The Network Configurator can support new devices if the proper EDS files are installed.
To install the EDS file, use the following procedure.
1
Select EDS File − Install.
The Install EDS File Dialog Box is displayed.
2
Select the EDS file to install and click the Open Button. Next, select the icon file (*.ico). The
EDS file is added to the Hardware List as a new device. If the hardware already exists, the new
Hardware List will overwrite the previous one. If the hardware versions are different, a hardware
device is added to the Hardware List for each version.
A-2-1 Installing EDS Files
EDS File − Install
To Next Page
Loading...
