2 Installing Ethernet Networks
2-2
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
2-1 Selecting the Network Devices
The following table shows the devices recommended for use with the EtherNet/IP.
z Ethernet Switches
* We recommend using combinations of the above cables and connectors.
z Boots
Precautions for Correct UsePrecautions for Correct Use
• Always use a Ethernet switch for tag data links in the network.
• If a repeater hub is used for EtherNet/IP tag data links (cyclic communications), the network’s
communications load will increase, data collisions will occur frequently, and stable communi-
cations will be impossible.
2-1-1 Recommended Network Devices
Product Manufacturer Model Contact phone number
Sizes and conduc-
tor pairs: AWG 24 ×
4 pairs
Cables Tonichi Kyosan
Cable, Ltd.
NETSTAR-C5E
SAB 0.5 × 4P
Kanetsu Planning Department
Kuramo Electric
Co., Ltd.
KETH-SB Kuramo Electric Co., Ltd.
SWCC Showa
Cable Systems
Co. Ltd.
FAE-5004 SWCC Showa Cable Systems
Co. Ltd.
RJ45 Connec-
tors
Panduit Corpora-
tion
MPS588 Panduit Corporation, Japan
Branch, Osaka Sales Office
Sizes and conduc-
tor pairs: AWG 22 ×
2 pairs
Cables Kuramo Electric
Co., Ltd.
KETH-PSB-
OMR*
Kuramo Electric Co., Ltd.
RJ45 Assembly
Connectors
OMRON XS6G-T421-1* OMRON Corporation, Cus-
tomer Support Center
Sizes and conduc-
tor pairs: 0.5 mm ×
4 pairs
Cables Fujikura Ltd. F-LINK-E
0.5mm × 4P
Kanetsu Planning Department
RJ45 Connec-
tors
Panduit Corpora-
tion
MPS588 Panduit Corporation, Japan
Branch, Osaka Sales Office
Product Model Contact phone number
TSUKO MK Boots (IV) LB TSUKO
To Next Page
Loading...
