Omron NJ501-1300 - Making the Settings with the Sysmac Studio

9-11
9 Socket Service
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
9-4 Settings Required for the Socket Services
9
9-4-2 Making the Settings with the Sysmac Studio
This section describes the items that are set in the Sysmac Studio to use the socket services.
z IP Address
* These settings are required if you select the
Fixed setting Option.
9-4-2 Making the Settings with the Sysmac Studio
TCP/IP Display
Parameter Description Default
IP Address Set the setting method for the IP address of the built-in EtherNet/IP.
• Fixed setting
• Obtain from BOOTP server
• Fix at the IP address obtained from BOOTP server
Fixed setting
IP address
*
Set the IP address for the built-in EtherNet/IP port. 192.168.250.1
Subnet mask
*
Set the subnet mask for the built-in EtherNet/IP port. 255.255.255.0
Default gateway Set the default gateway for the built-in EtherNet/IP port.