Omron NJ501-1300 - FTP Settings Display

10 FTP Server
10-6
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
The built-in EtherNet/IP port settings that are set when the FTP server is used are shown in the Edit
Parameters Pane on the Sysmac Studio.
z Setting
*1 These settings are required to use the FTP server.
*2 The login name and password are case sensitive.
10-3-3 FTP Settings Display
Setting Description Default
FTP server Specify whether to use the FTP server. FTP connec-
tions from external devices will not be possible if the Do
not use Option is selected.
Do not use
Port No.
*1
Set the FTP port number of the built-in EtherNet/IP
port. It is normally not necessary to change this setting.
FTP uses two ports: a port for control and a port for
data transfer.
• Control Port
Set the FTP port number.
• Data Transfer Port
The data transfer port number is always 20.
21
Login name
*1
Set the login name to externally connect to the built-in
EtherNet/IP port via FTP. (You can use up to 12 alpha-
numeric characters.)
*2
None
Password
*1
Set the password to externally connect to the built-in
EtherNet/IP port via FTP. (You can use 8 to 32 alphanu-
meric characters.)
*2
None