Omron NJ501-1300 - Reading a Network Configuration File

7-57
7 Tag Data Link Functions
NJ-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
7-2 Setting Tag Data Links
7
7-2-13 Reading a Network Configuration File
You can read a previously saved network configuration file into the Network Configurator.
1 Select File − Open or click the Button.
The following dialog box is displayed.
If the network configuration file that you want to read is not displayed, change to another folder.
2 If you select the network configuration file that you want to read, that file name is displayed in
the File name Field.
3 Click the Open Button to read the network configuration file.
7-2-13 Reading a Network Configuration File